OK Industries/Metcal - Talon Upgrade Kit
Talon Upgrade Kit includes Talon Tweezer Handpiece, stand, sponge, tip removal pad, (tips not included) for use with the Metcal MX-500 and PS2 stations.
OK Industries/Metcal Refurbished PS2E-01 Soldering Station
Refurbished Metcal PS2E-01 Soldering Station with stand and new handpiece, 115vac, 60Hz.
Qualitek - RA Paste Flux
Qualitek PF400 Rosin Activated Paste Flux is a direct replacement for Kester SP-44 RA Paste Flux which has been discontinued by Kester.
Techni-Tool - Flux Dispenser Bottle 2oz.
2 oz Flux Dispenser Bottle has 1 inch long 20 gauge needle for dispensing small amounts of flux exactly where needed.
Ungar/Weller - U9017 Long Conical
Ungar 9000 Series Tip for 9911, 9911AS, 9370, 9380 and UTC200 Series Irons.
Ungar/Weller U9056 Short  9000 Series Tip*
Ungar 9000 Series Tip for 9911, 9911AS, 9370, 9380 and UTC200 Series Irons. *Requires Ungar 9919  Heavy Duty Tip Retainer Assembly
Ungar/Weller U9060 - 0.110" Short Heavy Duty Chisel Tip*
Ungar 9000 Series Tip for 9911, 9911AS, 9370, 9380 and UTC200 Series Irons.*Requires Ungar 9919 Tip Retainer Assembly
Ungar/Weller U9061 - 0.135" Short Chisel Tip*
0.135" Short Chisel Tip for 9911, 9911AS, 9370, 9380, and UTC200 Series Irons*Requires heavy duty tip retaining sleeve
Weller - 30 Watt Soldering Iron
Professional 30 Watt stick iron, features an interchangeable HE30 plug-in heater, three wire power cord, 120vac, 60 Hz.
Weller - 80 Watt Soldering Iron Kit
Heavy Duty 80 Watt stick iron, heats up to 900 degrees F. Comes with 3/8" chisel tip, iron support stand, 5 foot two wire power cord, indicator light. 7 year manufacturers warranty. 120vac, 60 Hz.
Weller - BA60 Barrel Nut
BA60 Retaining sleeve and nut for holding the tip in place on the TC201, EC1201, PES50, and PES51 soldering handpieces. Newer vintage BA60 required on newer vintage EC234 plug-in and TC208 wire in heaters for the TC201 and EC1201 handpieces due to the upper portion of the heater barrel having a larger diameter.  
Weller - EC231 Barrel Nut for EC1301 and EC1302 Handpieces
Replacement Barrel nut for EC1301 and EC1302 20 watt Weller handpieces. Uses EPH series tips
Weller - ET Series Tip ETA
ETA Chisel tip, 1/16" wide, 0.62" long, standard tip on EC1201, PES50, and PES51 Handpieces.
Weller - Heating Element for newer vintage TC201 and EC1201 Handpieces
40 watt replacement heating element for newer vintage TC201 handpieces for the WTCP series soldering station and the newer vintage EC1201, (2 screw attachment, plug-in style internal attachment). NOTE: Heater has a portion of the OD that is larger and will require a newer vintage BA60 Barrel Nut to retain the tip.
Showing 31 to 45 of 82 (6 Pages)