Hakko -  A1174  24V-60 Watt Heating Element
Replacement Heating Element for Hakko 807 Pencil style desoldering handpiece..
Hakko -  FX888D-23BY Digital Soldering Station
 FX888D-23BY - Takes up about 35% less bench space, provides more power than the 937 station, Temperature Range 392 degrees F to 896 degrees F, 65 watt heater, rapid heat-up and fast thermal recovery, 120vac, 60Hz..
Hakko - 3.0mm ID Nozzle for 851-2 SMD Rework Station
3.0mm ID Nozzle for 851-2 SMD Hot Air Rework Station..
Hakko - 472 Refurbished Self-Contained Desoldering Station
Hakko 472 refurbished self-contained Desoldering Station with 807 pencil-style handpiece, NEW 60 watt heater, new seals/filters. Handpiece holder*, Operators Manual. 115vac, 60Hz, three wire cord.*Note: Handpiece holder may be mounted on the side of the station instead of a separate stand as the picture shows__SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value)...
Hakko - 611-2 Double Spool Solder Roll Holder
Hakko 611-2 weighted base double roll solder spool holder for two each 1 pound solder rolls (not included)...
Hakko - 900 M Series T
Several Sizes and models of Soldering Tips:Hakko 900M-T-0.8D Chisel Tip 0.8mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.2D Chisel Tip 1.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.2LD Long Chisel Tip 1.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-1.6D Chisel Tip 1.6mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-2.4D Chisel Tip 2.4mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-3.2D Chisel Tip 3.2mm wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-4C 45 Degree Bevel Tip 0.158" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-I Conical Tip 0.008" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces.Hakko 900M-T-SB Narrow Conical Tip 0.008" wide for 907 Handpiece on the 936 and 937 Soldering Station, also for 900M, 933, 376, and 913 Handpieces...
Hakko - 903 Replacement Handpiece
Hakko 903 Replacement Handpiece for 939 High Performance Solder Station. Comes with 1.6mm Chisel Tip...
Hakko - 907 Replacement Handpiece
Hakko C1148 907 Replacement Medium Handpiece for 936, 937, 703, 928..
Hakko - A1009 Ceramic Disc Filter for 470 Series Desoldering Base Unit
A1009 Ceramic Disc Filter (10 pack)  for "last chance" filter in the base power supply..
Hakko - A5044 Ceramic Disc Filter for 817, 808, 809, 807, FR-41XX/300 Desoldering Handpiece (Previously A1033)
Ceramic Disc Filter for 817, 808, 809, 807, FR-41XX/300 (10 pack)..
Hakko - Factory Refurbished 471-2 Desoldering Station
Factory Refurbished 471-2 Desoldering Station requires 70 PSI shop air to create the vacuum, 802 gun-style handpiece, 50 watt heater, stand, manual, complete with accessories (spare filters,cleaning pin, etc) 120vac 60Hz__SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value)...
Hakko - Factory Refurbished 853-2 Preheater
Factory Refurbished 853-2  Preheater used to preheat a circuit board with large ground planes, heat shields, RF shields, etc., so the soldering iron can properly melt the solder 120vac 60Hz..
Hakko - Factory Refurbished 96E-V12 Analog Solder Pot
Factory Refurbished 96E-V12 Analog Solder Pot includes dross removal tool and manual 120vac 60Hz..
Hakko - Refurbished 473-1 Desoldering Station
Refurbished 473-1 desoldering station requires 70 PSI shop air to create the vacuum, 807  60 Watt pencil-style handpiece, Handpiece holder, Operators Manual, 120vac 60Hz, 3 wire cord.___Note:  Handpiece holder may not be as depicted in the photo.  Holder may be mounted on the side of the station.___SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value)...
Hakko - Refurbished 703 or 703B Digital Self-Contained Solder/Desolder Station
Refurbished 703 or 703B  Digital Self-Contained Solder/Desolder Station with 2 each  907  50 Watt soldering handpieces and one 807 Desoldering handpiece with a new 60 Watt heater installed. 115VAC, 60 Hz three wire cord. operators manual.__NOTE: Handpiece stands may not be as depicted in the photo.  Desoldering Handpiece holder may be mounted on the side of the station.__SPECIAL BONUS:  2 Desoldering tips of your choice FREE with purchase of any Hakko desoldering station ($34 value)...
Showing 1 to 15 of 27 (2 Pages)